呔鈴一問~

by **BENNY** on 12 Apr 2010, 21:52

想問下師兄, 唔知SW20 行唔行到呢套OFFSET呢 ? 會唔會OVERSIZE?

頭17×8,5JJ＋37 PCD114.3 , TIRE : 215/40/17

尾17×9,5JJ＋35 PCD114.3 , TIRE : 235/40/17

謝謝~

by **tommy** on 13 Apr 2010, 00:40

呢個offset應該 for 7.5/8.5, 8.5/9.5應該rub沙版!

by **ChrisSW20** on 13 Apr 2010, 09:00

I had a set of

17 x 8 +35
17 x 9 +35

Fitment is perfectly flush with a stock body, depends if you are running coilover or not. You might need a small (3mm) spacer in the front to clear the suspension. The rear will need a good fender roll (Ma Lam can do it).

For the

17 x 8.5 +37
17 x 9.5 +35

You should be okay with the above modifcation. Tires size are good, a little stretched, make sure you choose a "more round" edge tires like the Yoko S-Drives, Dulop DZ101, etc....

Good luck, I am sure this will look very nice and agressive with those offset. Hopefully theres a BIG FAT lip

by **BENNY** on 14 Apr 2010, 00:48

Thanks for tommy & chris info, Let me try try~

by **BENNY** on 04 Jun 2010, 19:29

另行如果頭轆行 17x 7.5jj x 40 效果好冇呢? 謝謝

by **tommy** on 04 Jun 2010, 23:37

BENNY wrote:另行如果頭轆行 17x 7.5jj x 40 效果好冇呢? 謝謝

7.5j+40都ok...會縮入少少, 7.5j+33 to 35就Fit哂!(唔look沙版計)

by **BENNY** on 05 Jun 2010, 11:34

明白哂.thank tommy~

by **Edward yip** on 05 Jun 2010, 20:04

仲要睇吓你用緊原裝避震定係攪牙????

by **BENNY** on 06 Jun 2010, 02:26

用緊TEIN 攪牙..效果配唔配合呢? thx

by **tommy** on 07 Jun 2010, 11:31

Tein ok,我之前都係

by **ENJOYKWOK** on 09 Jun 2010, 19:37

tommy wrote:Tein ok,我之前都係

TRD用咩off set 好呢???

by **tommy** on 10 Jun 2010, 00:13

offset一樣，不過有d避震會頂到，TRD要問吓我地兩位『技術顧問』先

by **ENJOYKWOK** on 10 Jun 2010, 22:51

tommy wrote:offset一樣，不過有d避震會頂到，TRD要問吓我地兩位『技術顧問』先

THX~~

by **tommy** on 10 Jun 2010, 22:58

技術顧問又偷懶！

by **ENJOYKWOK** on 11 Jun 2010, 00:14

tommy wrote:技術顧問又偷懶！

16"鈴咩off set 好thx

by **Edward yip** on 11 Jun 2010, 00:53

ENJOYKWOK wrote:
tommy wrote:技術顧問又偷懶！

16"鈴咩off set 好thx

頭用7j x+33 205/45R16
尾用8j x+30 225/45R16
不過尾呔只有幾款有得選擇,如果用225/50R16就可以多二款

by **tommy** on 11 Jun 2010, 11:21

唔該哂我地嘅技術顧問。咁TRD+7.5J/8.5J會唔會頂呢？

by **Edward yip** on 13 Jun 2010, 01:16

tommy wrote:唔該哂我地嘅技術顧問。咁TRD+7.5J/8.5J會唔會頂呢？

TRD+7.5J/8.5J用16吋+33係會頂要磨2mm避震

by **Hung** on 13 Jun 2010, 01:20

Edward yip wrote:
tommy wrote:唔該哂我地嘅技術顧問。咁TRD+7.5J/8.5J會唔會頂呢？

TRD+7.5J/8.5J用16吋+33係會頂要磨2mm避震

O甘加3mm spacer 又可以嗎? :roll:

by **Edward yip** on 13 Jun 2010, 23:53

Hung wrote:O甘加3mm spacer 又可以嗎?

如果加3mm spacer會出左沙板

by **tommy** on 14 Jun 2010, 10:24

咁加3mm spacer,用8.5J +36. 係咪淨係後面頂?

by **ENJOYKWOK** on 20 Jul 2010, 14:06

http://www.28car.com/par_dsp.php?h_vw=y&h_id=60451
~~c兄呢對鈴個offset得唔得???可以回覆嗎???

by **ChrisSW20** on 21 Jul 2010, 09:30

ENJOYKWOK wrote:http://www.28car.com/par_dsp.php?h_vw=y&h_id=60451
~~c兄呢對鈴個offset得唔得???可以回覆嗎???

Perfectly flush, fitment is good (slight roll at the rear fender, might need a 3mm spacer in the front to clear the suspension)

Tire size
Front = 215/40/17
Rear = 235/40/17 to 255/40/17 depending on your car

but VERY UGLY.........

by **ENJOYKWOK** on 31 Jul 2010, 00:19

17"8J+38~~呢個offset得唔得c兄

by **sduwu** on 11 Aug 2010, 14:32

F: 17" +35 8J <用205/40/17
R: 17" +35 9J <用215/45/17
岩唔岩呢? d 呔裝唔裝得落套軨度呢?

呔鈴一問~

呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Re: 呔鈴一問~

Who is online